-
Hi
I've spent some time already finetuning soft- and hardware setup for PCB milling with flatcam + bCNC. After a lot of trial and error, I'm still struggling trying to achieve a consistent cutting …
-
Hey
the question is, you can get your sensor connection diagram with all denominations.
thanks.
-
When doing board alignment the function should return the maximum alignment error and report this to user, for example a pop up dialog box saying "Maximum error is XXmm, if not acceptable try alignin…
-
### Is your feature request related to a problem? Please describe.
I am trying to "go Fast," and my heavily modified Aquila can easily extrude nicely at 80-100MM/sec, but my acceleration on the last …
-
I have a strange issue. When I connect the 18650 battery, screen goes blank however blue LED is on. I've tested if ESP32 getting 3.3v and confirmed that its getting 3.3v.
What could be the issue? …
-
Ok, Houston, we have a problem.
I order a second minilaser diode for fabmob but I was not please with the first one and I order the same used by bemaker this time. The machine is arrived, it's mou…
-
I think that right now the plan is something like the following (taken from [Board Election Procedure 2024](https://docs.google.com/document/d/1_uQX6B0lhp3LGhmvB8ttmBA35yXMWY4HyAOipC8lqNs/edit):
- …
-
The explainer says:
> To signal to the browser that a given web app is using Source Code Transparency, we could introduce a X.509 certificate extension, which would automatically be included in the…
-
I have tested 4 Atom Lite with the deep-sleep sketch from the ESP32 library. I powered the modules directly with 3.3V and measured the power consumption in the 3.3V supply line. Nothing else was conne…
-
En gros, pour continuer sur le commentaire de Jason, est-ce qu'on y va pour full SMT ou full through hole?
Pour moi, ça se résume à:
SMT:
- Moins cher (il faudrait évaluer la différence en $ mais…