-
The following fix is causing an issue with TinyG:
https://github.com/chilipeppr/widget-eagle/pull/38
Apparently, G3 commands for full circle are not interpreted correctly by TinyG if there are XY …
-
Hi all, I'm just getting started with building a CNC with G2 as the motion controller. I've built other CNC systems before on larger machines, so I'm pretty comfortable with the hardware/electrical en…
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…
-
Use [4m1g0/tinyGS-webapp](https://github.com/4m1g0/tinyGS-webapp) for reference.
- Home page
- [x] Home page contents
- [ ] Map using leaftlet
- Navigation
- [x] App (Top) bar
- [x]…
-
workaround1:
```
sudo ln -s `which nodejs` /usr/local/bin/node
```
workaround2:
```
sudo apt-get install nodejs-legacy
```
error:
```
~$ sudo npm install -g tinyg
-
> serialport@2.1.2 install /…
-
Saw this (infrequently) on 3009, still seeing (infrequently) with 3256; both Win7 and Linux
On startup, X and or Y coordiates don't display as 0.000, even if tinyG has been reset.
Values appear in t…
-
Delivers error message Attempt to move outside safe limits (3.05,3.25,0.00)
plus
TinyG Message: Homing Error Y axis settings misconfigured
-
When trying to changes settings for G2 hardware, only parameters for x axis are sent to the controller
For example I changed params for all 3 axis, and only the following was sent:
`{"x":{"am":1,"sn":…
-
I have phones and tablets sitting around with USB-OTG that can serve as a host for a TinyG/ChiliPeppr. Any possibility of an Android release?
Thank you!
-
Hi,
I have a Arduino Due running g2core 078.03.
Once I open the updater app it just always says "Waiting for a TinyG to be connected..."
I've tried both USB ports on the Due.
I've tried restarti…