-
**Is your enhancement proposal related to a problem? Please describe.**
The **[USB-C Subsystem](https://github.com/zephyrproject-rtos/zephyr/pull/45601)** has merged but there was an unresolved discu…
-
### Related area
New port support.
### Hardware specification
STM32H7R/STM32H7S
### Is your feature request related to a problem?
While TinyUSB already supports the H7 series, it uses an off-chip…
-
Since version v0.6.2 of mGBA for the Nintendo Wii, USB drive support has been broken.
This means, the emulator can't be used from an USB device (but works fine if loaded from SD card).
**The mGB…
-
**Describe the bug**
After upgrading Zephyr from v3.6.0 to v3.7.0, the project `samples/subsys/usb_c/sink` fails to work correctly on weact_stm32g431_core. The project compiles successfully, but th…
-
**Describe the problem you have/What new integration you would like**
Add support for Hynetek HUSB238 USB Power Delivery (PD) controller.
_The [Hynetek HUSB238](https://en.hynetek.com/2421.htm…
lboue updated
5 months ago
-
Instead of requiring two USB cables to power the IO board, develop a remote USB board that only requires one USB input (probably USB-C with PD).
-
USB PD wont go to 20V on 2.22 firmware some chargers only go to 16v and some 18V
Both chargers work with 2.21 firmware on 20V
**To Reproduce**
Flash 2.22 firmware.
**Expected behavior**
Eve…
-
### General issue report
**ESP-IDF v4.4.2
ESP32-S3**
See original issue: https://github.com/espressif/esp-idf/issues/8748 for more details.
Esp USB stack sometimes crashes (~5% chance) when…
-
Good day, I have an orico box, it supports NVME, but how can I add ngff sata support? I know that normally there is rtl9210b on the device, so I set the firmware to 1.33.44.
-
**Add support for USB Type-C controllers with PD**
This is useful when designing products using USB-C connectors needing additional support like higher current, role-switching "host/device", power …