-
Trying to `make` and
```make -C /lib/modules/6.5.4-arch2-1/build M=/home/sc/t/spi-ch341-usb modules
make[1]: Entering directory '/usr/lib/modules/6.5.4-arch2-1/build'
CC [M] /home/sc/t/spi-c…
-
I tried to compile and insert in Mageia Linux 5.15.23-desktop-1.mga8 and an old computer with Debian Linux too. The Debian could compile and start /dev/spidev0.0-2 auto, but Mageia doesn't creates sp…
-
This is a how to do it from my experience and it went well, I wanted to share it with the community so they don't do the same mistakes I went through :).
Maybe something for the documentation part…
-
### Description
Initial targeted list of examples in this [pad](https://pad.riot-os.org/aPbbp77KTEKZb--l6GwdUA?both).
For each example,
- [ ] implement when missing
- [ ] minimize
- [ ] che…
-
Hi thanks for your great work and contribution.
can i use your USB display driver in order to drive ILI9163 FBTFT display panel connected to USB-To-SPI bridge (FT232H for example) ?
the data path f…
-
Dear Team,
Today while trying to work on the GPAD for the HardwareX paper, I released that I had a major misconception: you can't program it through the serial port with another microcontroller wit…
-
I have buyed two 8 channel 24 MHz Saelae compatible logic analizers
Current available software do not allows to have both pluged into USB at the same time
So I am using 2 PC when I need more t…
-
I built the ft232 module and enabled `ft232h_usb_spi` in `start.py`, but dmesg doesn't say anything besides `Succeed to register spi driver(nrc80211).` .
I suspected a mismatch between the FT232H w…
-
Regards
mfp20 updated
3 years ago
-
Similarly to the USB-UART bridge, it'd be really useful to have an option to use flipper as a i2c device (Ideally both as a master and a slave that shares the memory to the host computer). Similarly a…