-
How can I add a micro switch that will stop the stepper motor, after the distance I choose ?
-
### The problem
Tera EV Charger is unsupported
### What version of Home Assistant Core has the issue?
core-2024.5.3
### What was the last working version of Home Assistant Core?
_No response_
#…
-
> @rubengte Sure, it should be possible. What datasource are you using, and what are the upper limits that you'd like to ignore? If the number that the datasource returns is higher than your predefine…
-
I have been able to successfully get my cutter to cut designs. However, it always stops before the design is finished. It cuts something like 90% of the design and then stops dead. There is no error m…
-
# Log Message
Device matches None with quality of 0%. DPS: {"updated_at": 1710885485.876341, "1": 0, "3": "charger_free", "4": 8, "9": 0, "10": 0, "13": "controlpi_12v", "14": "charge_now", "…
-
Here's something very, very weird that I've been struggling with for the past 10 hours or so. lprint seems to be very finicky about the system hostname settings.
Here's what I have:
My home offi…
-
### Description
Hi,
I've some issues with my controller and noticed that the software doesn't provide any user feedback when the controller disconnects. For some reason my controller keeps recon…
agowa updated
4 months ago
-
I was considering setting up a system to control my above ground 14k gal pool with a ControlOMatic MegaChlor-CD which is a relatively simple device you just drop in your pool (provide it with 12V set …
cb88 updated
5 months ago
-
### The problem
Using this `/config/rtl_433/rtl_433.conf.template` file:
```conf
# config for rtl_433
# A valid config line is a keyword followed by an argument to the end of line.
# Whitespa…
-
We've had a number of users ask about Harbor Freight's new cast steel anvil, which seems to be a reasonably good option for newbies. Let's include it on the equipment recommendations pages.