-
I am monitoring a couple analog VHF low band channels (42MHz) and have noticed the audio is distorted, some times the dispatcher is understandable but if they start speaking louder it distorts and the…
-
### Description of the feature you're suggesting.
Does the CPU have enough horsepower to monitor/RX both the VHF AIS frequencies (87B and 88B) at the same time? Would love to have that option next to…
-
Hi,
I recently put on the air a T-TWR VHF and it dont't decode any APRS transmitions in RF.
I can heard the signal from its speaker, but it do not send to APRS.fi any stations.
I have tried iGat…
-
I am thinking to remove HF/VHF mode. Instead introducing a new concept called frequency range. Each handware can have different range list and deal with the range with the different logic.
For exam…
-
Show under the name of a marina where address info etc is shown, the value of key vhf for leisure=marina to easily contact that harbour via marine VHF radio. Note, this is not shown on the map but in …
-
On my duplex hat I have tested VHF only and UHF only split frequencies and works fine.
If I try to set duplex hat TX to VHF and RX to UHF or TX to UHF and RX to VHF,
the duplex will TX on set f…
-
Hallo Github,
I have a problem with my Welle.IO Setup. I use a DVB T Stick (MSI Digivox mini deluxe) which works on my notebook. I tryed 3 antennas, the one for all sv9323, a passive antenna from kab…
-
From Issue #14
Now that Jason has the Kenwood Nextedge capable repeater, I believe the TODOs are:
- [ ] Reprogram for new frequency. Perhaps 146.940 or 145.230.
- [ ] Find a new duplexor for …
-
If the name (corresponding to the id), IN THE INTERNAL CONTACT LIST OF THE DEVICE, is long 16 bytes, when firmware reads it, it not founds the terminating 0 (nul) byte (I think) and then, when the nam…
-
As discussed in https://github.com/ms-iot/samples/issues/522 and in the comments on https://docs.microsoft.com/en-us/windows-hardware/drivers/hid/virtual-hid-framework--vhf-:
It seems that custom HID…