-
For SSID in wifi STA mode in esp32, Jaculus is using nvs_flash key-value to save a configured SSID. NVS keys are limited to 15 characters (see below), so Jaculus esp32 cannot be configured and connect…
-
### Robot Model
Turtlebot4 Standard
### ROS distro
Humble
### Networking Configuration
Discovery Server
### OS
Ubuntu 22.04
### Built from source or installed?
Installed
…
-
In the last version of OnStepX it was possible to connect via bluetooth. Namely in "Extended.config" (#define SERIAL_BT_MODE SLAVE // OFF, use SLAVE to enable the interface (ESP32 only).
In the new v…
-
**Describe the bug**
wireguard not working over wifi
**Device information**
Model UZG-01
Firmware 20240707
Hardware ESP32-D0WDQ6
Role Coordinator
Firmware 20240710
-
### TFT Version
_No response_
### ESPHome Version
2024.6.6
### Blueprint Version
4.3.9
### Panel Model
EU
### What is the bug?
Hi,
after I have successfully flashed the NSPanel, the panel do…
-
### The problem
### Problem Description
When I use the following configuration in my ESPHome YAML:
YAML
wifi:
enable_on_boot: False
And then manually connect to the network in STA mode…
-
### Describe the bug
When I add a client interface to any wifi card of my device, the result is that the ap of this wifi card cannot work properly. Below is my configuration and test results
Bel…
-
In HA, if I flash the build coming from the following template, then the device goes in boot loop and doesn't work anymore.
```
substitutions:
name: everything-presence-lite-285334
friendly_…
-
After conducting a factory reset via the device's configuration page, the user is locked out of the system: neither does it create the default access point, nor does it link to a previously defined Wi…
-
### Describe the bug
I did read the solved and related issue [#13427](https://github.com/openwrt/openwrt/issues/13427)
Experiencing the same problem with my new ZBT-WE3526 router. 5G Wifi signal s…