-
I have done BOOT loader flashing as per instructions for my HI3518EV200 and it failed at 98%.
Now it is bricked.
Could you please tell me what I did wrong and support in recovery.
Logs below:
…
-
Hello
Model Escam PVR008
Board S834-A0-B
Sensor F23
CPU Hi3518ERNCV300
Network Realtk 8188ETV (M8188FU3)
openipc-2.1 commit ab38bfa0824ec2fd8eb8ef7cb4cf6e9f404cca02
serial flash
u-boot 0x…
-
### The problem
No registered handler for event tns1:Device/Trigger/DigitalInput
### What is version of Home Assistant Core has the issue?
2021.3.4
### What was the last working version of Home As…
-
Hello!
Using openipc 2.1 firmware for xm530. ipctool does not detect any sensor.
Majestic only works in hls h265 mode, mp4, jpg, rtsp does not work...
Only some i2c_write timeout is shown in the …
-
Здравствуйте.
На странице https://github.com/OpenIPC/openipc-2.1/wiki/Memory-tuning расписано какие модули за что отвечают.
Можете добавить описание того, как можно отключить модули и потом включить…
-
Hello
export PLATFORM=xiongmai;make prepare;make BOARD=unknown_unknown_xm510_openipc clean distclean
export PLATFORM=xiongmai;make prepare;make BOARD=unknown_unknown_xm510_openipc all
```
wget …
-
I don't get any picture when I try to run the latest firmware (2.1.11.03) on an Escam QF518.
I tried the XM550 and XM530 firmware.
When I try to run majestic manually I receive following result:
…
-
Hi,
i tried to compile the source for xm530 target, but i received several errors. Some of them i was able to fix.
Here is what i did:
```
git clone --depth=1 https://github.com/OpenIPC/openip…
-
Hello!
Using openipc 2.1 firmware for xm530.
Majestic only works in hls h265 mode, mp4, jpg, rtsp does not work....
Should this other modes also work with the current state of XM530 development?
…
-
Hi, i am trying to figure out what i am doing wrong. I followed the instructions and now i have the ftp binary on the camera, However when i try to run it i get an error:
`/bin # ftp
-/bin/sh: ftp: …