-
@bryphe I've noted that while scrolling which is now more tolerable on mac, that the hover tooltip and the definitions follow the scroll, whereas I think the expected outcome with the tool tip is that…
-
As a scientist on ZOOM I want to use the [7.5T magnet](https://www.isis.stfc.ac.uk/Pages/75T-Magnet.aspx) during the cycle starting on the 14th of November
**Acceptance Criteria**
1. I am able to …
-
When installing epics-pydevsup-dev I get the following error:
```
devuser@develop-vmphy0:~$ sudo apt-get install epics-pydevsup-dev
Reading package lists... Done
Building dependency tree
…
-
As someone concerned with the motion on ZOOM I want to be able to automate the soft limits on the detector and baffle axes to avoid triggering the bump strips in standard operation of the system.
*…
-
As an ENGIN-X scientist, I want to control the motors that drive the collimators, so that I can put the collimators in the optimum position for my experiment.
#### Acceptance Criteria
1. I can vie…
-
As an IBEX developer, I want to create an IOC that can communicate with multiple Galil axes controlled by LabVIEW VIs.
#### Acceptance Criteria
1. I can configure the IOC to communicate with multi…
-
caQtDM seems to responds to changes in access-security status only when a display is opened.
-
As an ENGIN-X scientist, I want to adjust the settings of each of the Sample Positioning System, so that I can control the position and orientation of the sample.
#### Acceptance Criteria
1. The…
-
As an instrument scientist on RIKEN, I want to be able to monitor the level of helium in my cryostats.
As a member of the cryogenics team, I want to be able to monitor the helium levels on RIKEN.
…
-
As an IBEX user I want to be able to control the Instron Stress Rig natively in EPICS in order to leverage the best use of the system.
**Acceptance Criteria**
There are additions to the protocol a…