-
I've made several attempts on this device. It got an "A-" AP, so I guess that means it has been "cut"? This is a TreatLife SL-10 RGB bulb, which Tuya app showed as version 1.3.21 (checked before I sta…
-
Hi,
I've managed to flash a custom ESPHome firmware to one of my LSC RGBWW smart ceiling lights. The initial flashing went as intended. The device is also connected with my WiFi. But i need to refl…
-
Pretty new to ESPHome, setting my my first ESPHome configuration file, for a Arlec PC191HA power plug. It has a profile on Blakadder (https://templates.blakadder.com/arlec_PC191HA.html) which includ…
-
### TFT Version
4.2.4
### ESPHome Version
4.2.4
### Blueprint Version
4.2.4
### Panel Model
NSPanel EU Model
### What is the bug?
Nextion is not connected! and Display Shows System Data Error…
-
The project name is about to be changed to something else, for a few reasons:
- to address any issues that may arise due to the possibility of "LibreTuya" name violating Tuya Inc.'s trademark rights.…
-
Hi there,
I used the example yaml file in /examples to modify my working yaml file for my Onju home speaker. Since Onju home is based on the same esp32-s3-devkitc-1 as the example yaml uses, I was …
-
Hey all,
I'm trying to add my TH01 temp/humidity sensor but I can't figure out which option to pick from. I've tried the generic temp and humidity sensors, and I've also tried it by firmware, but m…
-
Is there something wrong with the file?
-
Hi,
i successfully flashed an bk7231n with openbk.
now i'm trying to include it in esp home with ota update but it doesn't accept the file as suggested [here ](https://community.home-assistant.io/…
-
Hello!
I see WR2 module is supported by this project; but has anyone succeeded flashing it ? I've tried everything but failed to put it in flashing mode.
So far, the described procedure is:
1.…