-
After updating to the latest code, I have build issues for ESP32 target:
```
C:\Users\rhys\source\repos\www-m5-mash>mcconfig -d -m -p esp32/m5stick_c
Checking Python dependencies...
Python requ…
-
I made a proof of concept Arduino sketch to enable wake-on-motion for the MPU6886 inside the M5StickC. I'd like to fork the repo, add support for wake-on-motion (to GPIO Pin 35), and then submit a pul…
-
**Describe the issue**
Grafik Glitches. With the DP 2.8Zoll Iili9341 and the Touch Controller XPT2046. The Touch is Working.
I use the Benchmark example.
Bilder PRESS HERE
![IMG_3959](https:…
-
Hi there,
I have been trying to debug getAhrsData(&pitch,&roll,&yaw) without success.
With the M5StickC on the table without movement the values I get for yaw keeps growing in circles.
I did tak…
-
Hi,
I am trying to get my ESP32 running with BMP280. Unfortunately firmware gets too big
Compiler log can you find in attachment
[SensESP.txt](https://github.com/SignalK/SensESP/files/4684427/SensE…
-
Arduino:1.8.9 (Windows 10), 开发板:"ESP32 Pico Kit, 115200, None"
```
M5StickC_Smart_Watch:476:21: error: 'G39' was not declared in this scope
if (digitalRead(G39) == LOW)
…
-
Hi.
First of all, thank you!!! :)
I'm trying to upload the sample code on my m5stick but I get this error:
> ...
> Serial port COM15
> Connecting....
> Chip is ESP32-PICO-D4 (revision 1)
> …
-
Windows comes with Linux these days, and so MINGW is less than ideal. Would it be possible to update the [setup instructions](https://github.com/Moddable-OpenSource/moddable/blob/public/documentation/…
-
**Describe the bug**
alpha5 cannot see any of the preinstalled boards that are visible in alpha4
**To Reproduce**
1. run alpha5
2. check installed boards
**Expected behavior**
All preinstall…
-
Convert my own model to .kmodel from .h5(based yolov2-tiny).
Use "toco" to convert .h5 to .tflite.
`toco --keras_model_file yolov2tiny.h5 --output_format TFLITE --inference_type FLOAT --output_f…