-
Hi,
I noticed that my low battery detection did not work. The LED strip kept blinking pink. In the configurator the battery voltage is correct but the status is not connected. In CLI the status sho…
-
For people who know what they are doing. The 500hz synced default is pretty safe.
When using Asynchronous mode on F1 targets, it is theoretically possible to set the gyro faster than 500Hz. I have su…
-
I think ROSFlight sounds like a terrific solution to an easy to get into flight control system! I have gotten hold of a Naze32 Rev 6. One of the changes is that Rev 6. has a upgraded MPU 6500 vs 6050 …
-
Hi
I'm trying to get gps modes working, but it wont enable in modes tab. RTL should enable angle, althold automatically.
I have gps with at least 17 satellites on softserial 2 and it's working fine…
-
Hi there
Thanks for your hard work first.(Forgive my poor English plz,I'm just a middle school student in China and English is not my native language.)
I'm trying to port CM13 to my klimttd also as …
-
Hi,
I'm using the Cardboard SDK to play 360 videos in both mono and stereo mode. The video player works great in all phones, except I am running into an issue with the Galaxy S6. The audio plays norm…
-
Launching by throwing from the wingtip works fine but it is not suitable for my type of wing. If I throw the plane giving it a hard push from behind autolaunch does not work. Tested this like five tim…
-
Just flashed my lux with 2.6.0 std lux float p.i.ds and on left in get twichting i.e jumping up and down as if it's getting power spickes so to speck.
-
3 of my Quads drift heavily in Angle/Horizon modes.
All are using Cyclones.
MotoLab Cyclone FC
BLHeli-14.6
Betaflight 2.9
No matter how many times I calibrate the Accelerometer and do an "in flight…
-
Betaflight 2.9 seems to think there is no magnetometer on the SPRacing Evo.
Not a hardware issue, the mag is detected by switching over to cleanflight.