-
Is it possible to show an example of running the thermal cam via HDMI. Currently, I've commented out the `os.putenv` line, expecting it to work, but the screen goes black and nothing is drawn.
Perh…
-
I'm trying to build a device that uses I2S audio, however the software side of this requires that we use a dtoverlay to accomplish the driver loadout for the DAC. Do you have any suggestions for how t…
-
After following the guidance from [this](https://forums.adafruit.com/viewtopic.php?f=24&t=54246&start=15) forum post on a fresh install of stretch, the following happens:
```
pi@node-01:~ $ chmod …
-
Am wanting to use a gpio pin specifically pin 17 on adafruit pitft 2.2" (https://www.adafruit.com/product/2315) . Is this possible? Am also looking into a failsafe switch where user would turn the dev…
-
When setting up a Pi, I have always made sure that I could SSH into it (and have changed the password).
~~Tonight I ran the new version of this script for the first time, and at some point in the s…
-
I am trying to get my PiTFT to work with Kali Lunix, but I keep getting stuck on this point. I am following [this tutorial](https://learn.adafruit.com/kali-linux-on-the-raspberry-pi-with-the-pitft/ins…
-
I had the gamecon GPIO controller working perfectly on the newest version of RetroPie on a Rpi3. However when I follow the instructions to install a PiTFT 3.5" screen for emulators, the kernel that th…
-
Background:
I had an installation of Raspbian that I upgraded to the latest, when it switched to the Pixel desktop, the PiTFT 3.5" was just showing a white/gray screen.
Procedure:
I ran the scrip…
-
I've just started testing a PiJuice and have some questions about the tactile buttons. My intended use is to use a Pi 3 with the PiJuice and an Adafruit PiTFT 3.5" touch screen stacked on it as a sor…
-
Hello!
After running the adafruit-pitft-helper2.sh script on an rPI 2B, raspbian stretch, every CPU but CPU was disabled.
lscpu:
```
$ sudo lscpu
Architecture: armv7l
Byte Order: …