-
There appear to be two problems:
1. AREF is an input to Due, not an output, and it is not connected
Fix is to revert to 3.3V as reference voltage, as previous revision.
1. The OVREF voltage is too low…
-
The LCD and control work now. But the extruder is not outputting ay signals
-
I have stumped into the same problem as https://github.com/gnea/grbl-Mega/issues/55 but with generic RAMPS 1.6.
After reading the comments, I would ask if this is the case: grbl-Mega can not contro…
-
Hi,
I found that there were not ramp and losses functions in your util file. Could you
upload the two functions in the util file?
[ in trian.py,
from utils import ramps, losses---->cannot find re…
-
https://github.com/locationtech/rasterframes/pull/301/files#diff-0fe6afd825a768bd52f15c3f103e8b00R46
PR #301 recommended this issue...
Enable the user to select color ramp for tile rendering in…
-
i found strange bug, see the video:
http://www.youtube.com/watch?v=ZRhAlPOKss8
first 40 sec is normal work on z=12 mm/s , and last i try give more speed (20 mm/s).
1.30-2.05 sec move on 18mm/s
…
ghost updated
7 years ago
-
Author Name: **Otto Dassau** (Otto Dassau)
Original Redmine Issue: [10886](https://issues.qgis.org/issues/10886)
Redmine category:symbology
---
Hi,
I would nice, to be able to create relative colo…
-
Hi,
I'm looking for ways to tweak the floorplans generation : for exemple, ramps lower than 1m are not visible in the SVG files or for other characteristics that keep appearing in all my IFC files.…
-
I am running the program on Windows 10 using the Java Runtime Environment 8. I have a RAMPS 1.4 shield and an arduino mega with Marlin firmware. Whether or not it is connected to the serial COM port, …
-
Buenas, queriamos saber si este modulo para controlar el motor paso a paso esta bien... https://articulo.mercadolibre.com.ar/MLA-728430892-modulo-a4988-driver-pololu-3d-ramps-cnc-arduino-cdisipador-_J…