im-pro-at cncgcodecontroller issues

im-pro-at / cncgcodecontroller

CNC-GCode-Controller

MIT License

145 stars 59 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Preserve Spindle speed set in G0 or G1, fixing #41

#48 Patronics closed 1 year ago
1
Connect Arduino

#47 TicherWithoutTitle opened 2 years ago
1
Events that cause deliberate disconnect should be configurable (ALERT / ERROR)

#46 McNugget6750 opened 2 years ago
0
Make position Report compatible to GRPL1.1

#45 pknoe3lh closed 2 years ago
0
Program closes after clicking "Connect"

#44 dallonjp opened 3 years ago
3
OS X cannot find setting

#43 mron opened 4 years ago
0
Only "Sim" Device shows up in macOS?

#42 Patronics closed 4 years ago
0
Setting spindle speed or feed rate removed as "command without any motion"

#41 Patronics closed 1 year ago
0
NRSerial Baudrate check is stopping serial options in NRSerial

#40 LucidWolf opened 5 years ago
0
Spindle M106 and M107 support

#39 danriches opened 5 years ago
0
Add mirror also to Z axis, please

#38 mikulskipiotr opened 5 years ago
1
Create LICENSE

#37 im-pro-at closed 5 years ago
0
License ?

#36 suprafun closed 5 years ago
1
Double Sided PCBs and AutoLeveling

#35 McNugget6750 closed 2 years ago
1
Windows 10

#34 radex324 opened 6 years ago
3
Can you add Russian translation ??

#33 Lenivets71 opened 6 years ago
5
Using Marlin 1.5 mit Homeposition im Zentrum

#32 Edgar48 opened 6 years ago
1
Auto Leveling - All points read the same height.

#31 ShaneOberloier opened 7 years ago
2
gCode sending too slow? CNC stutters...

#30 McNugget6750 opened 7 years ago
6
starting

#29 azrituba closed 7 years ago
0
Different travelspeed settings for different axes

#28 J4363R closed 7 years ago
3
Auto leveling Issue

#27 Iakouben closed 2 years ago
13
Auto Leveling stops 1mm above surface without doing anything

#26 McNugget6750 closed 8 years ago
4
Autolevel problem

#25 pedro-dreyer closed 8 years ago
1
Simple control

#24 im-pro-at opened 8 years ago
0
Workflow Issue

#23 hokum86 closed 8 years ago
1
CNC/Spindle On replacement not working

#22 awmt102 opened 9 years ago
1
Coordinate grid after bed leveling is done + Marlin default baud rate

#21 Nihilianth closed 9 years ago
1
Add a simple control panel similar to Pronterface

#20 Nutz95 closed 9 years ago
2
Small additions for simplified usage and increased Gcode compatibility

#19 CarlosGS closed 3 years ago
4
Add separate "Home Z axis" option

#18 CarlosGS closed 9 years ago
10
Update settings property page for settings with multiple values.

#17 Nutz95 closed 10 years ago
0
fix issue https://github.com/pknoe3lh/cncgcodecontroller/issues/6

#16 Nutz95 closed 10 years ago
0
Can't run

#15 Tadeohb closed 10 years ago
6
Add simple Interface

#14 im-pro-at closed 9 years ago
6
G2 speed problem

#13 im-pro-at opened 10 years ago
0
Support for modal G1

#12 alromh87 closed 10 years ago
0
Suport for modal G1 (Changed for pull request)

#11 alromh87 closed 10 years ago
0
Update CNCCommand.java

#10 petejm closed 10 years ago
0
Update AutoLevelSystem.java

#9 petejm closed 10 years ago
0
Update CNCGCodeController.java

#8 petejm closed 10 years ago
0
Colud not connect

#7 vadimosk closed 10 years ago
4
Linguistics

#6 Tectu closed 10 years ago
2
Autolevel Options

#5 Tectu closed 10 years ago
2
Bugfix Rumba/Marlin 1.0.0 connection

#4 d00616 closed 10 years ago
1
How to run it?

#3 sailorpete12 closed 10 years ago
4
would be cool if you could post some dists to try :-)

#2 billieblaze closed 10 years ago
1
Add Checksum

#1 im-pro-at closed 11 years ago
0