-
Hello everyone!
I have a problem.
MY 1301 gateway uses sx1301 and two sx1255.My end-node uses stm32 MCU and sx1278 to send and receive packets.And i use \lora_gateway\libloragw\test_loragw_hal to …
-
Hi,
we are setting up a lora gateway and we followed the same steps mentioned in https://github.com/ttn-zh/ic880a-gateway. but we are unable to find complete procedure to run the gateway connected to…
-
I have installed lora_gateway and the lora-packet-forwarder git repos from Lora-net in my raspberry pi 3B and made connections to my IC8808 board as indicated in the image below.
https://forum.lo…
-
**Setup**
- Raspberry-pi 3
- RisingHF Dicovery IOT radio kit
I follow your guide to the letter but I get the sense I am missing something. My gateway is connected to TTN via resin.io process ,…
ghost updated
7 years ago
-
This is a **bug report** for **the kerlink packet forwarder**.
From what I can see on a kerlink gateway with the newly installed TTN packet forwarder, the CPU usage is very high:
![capture du 20…
-
Hi, I want to use KR channel plan related gateway conf file like below.
https://github.com/TheThingsNetwork/gateway-conf/blob/26cfea86d967dfe6cd4b319e8318d64eb4469900/KR-global_conf.json
it does…
-
As I can remember, the old installer needed Geo location to be set. But just a minute before I was trying to reinstall, didnt ask for geo location. Does that mean, I dont need to set Geo anymore???
-
As I had understood these channels 868.1, 868.3, 868.5 are the minimum set that all gateways should always be listening (for join etc.). Also, there is a channel (868.8) which supports only FSK modula…
-
Hi kersing
I've build from scratch on my PI3 with IMST IC880a board on raspbian etcher.
When I launch old packet forwarder all is working fine.
```shell
root@ttn-gw02(ro):/opt/ttn-gateway/bin#…
-
As stated in #24 the http-server will be transferred to the new luasocket.
Is this done already? Because I get panic when printing via lua.
For example:
`
print("Hello")
`
I get a kernel p…