-
**Describe the bug**
If not setting the Position for sondehub the upload of the data received doesn't seem to work, if setting a position I get Access denied.
**To Reproduce**
Run the devel bin …
-
**Describe the bug**
RAK46xx boards left out on solar enter a deep sleep state without regards to their battery/charging status. It may also do this regardless of power source.
**To Reproduce**
…
-
while merging #837 I noticed the following:
Sometimes nrf52 targets will stall reading from the pseduo serial port. This is only apparent if you have the port open via a terminal program or "mesht…
-
Would it be possible to add bluetooth passthrough ?
For example use a bluetooth terminal application and sent a text message between android phones.
-
I'm using the board "TTGO LoRa32-OLED V1".
In the code is "ttn.begin(SS, LMIC_UNUSED_PIN, RST_LoRa, DIO0,DIO1,DIO2);"
When compiling, I get the error:
```
/home/jms/Arduino/libraries/TTN_esp32/s…
-
This is not the easiest issue to describe, so please bear with me.
Device: TBEAM T22_V1.1 20191212 but the issue is not specific to this device.
Version: multiple, including latest master.
It al…
-
This is based on my observations running Meshtastic in stand-alone mode on the tbeam 1.1-M8N-SX1262, but may also apply to other boards using UBlox GPS modules.
For power saving reasons, Meshtastic…
-
1. Stratux version: v1.6r1-eu025
2. Stratux config: Default
SDR
- [ ] single
- [X] dual
type: NooElec Dual-Band NESDR Nano 3 Premium
GPS
- [X] yes
…
-
I am using TTGO-TBEAM-T22_V1.1. The GPS Module model is : NEO 6M-0-001.
I am trying to get my current location with example codes in TinyGPS++. But i only receive this message ;
09:33:21.877 -> N…
-
Sending remote commands to the admin channel using the --dest command times out.
See thread for more info and screenshots
https://meshtastic.discourse.group/t/admin-channel-timeouts-and-unresponsi…