-
with "make bl" I get compiler warnings with the linker:
arm-none-eabi-g++ obj_f1/DMRDMOTX.o obj_f1/IOSTM.o obj_f1/DMRTX.o obj_f1/POCSAGTX.o obj_f1/SerialArduino.o obj_f1/MMDVM_HS.o obj_f1/SerialPort.…
dl1bz updated
5 years ago
-
Hello, I'm trying to build a wifi to eth bridge using a WT32-eth01 module. I used the wifi-router example as a template.
I managed to configure the BLE provisioning. I can connect to my local wifi…
-
**Describe the bug**
After starting recording camera starts feeding frames but after some random time (sometimes its 5s the other 90s) camera stops feeding the frames. The process continues to work, …
zelo updated
2 months ago
-
```
My intentions is to do mux config on 40pin IO expander, turning one of the MMC2
pin to become a GPIO that I wanted to control.
Is this ok to let the beagle stuffs inside the devkit8000_defconfig…
-
**Describe the bug**
Router rebooted today. Miners lost connection but seem to have all (5 of them) connected back to wifi after it came back online. However, all 5 did not start mining.
I can …
-
### The problem
Begin January 2023 I uploaded 5 new WEMOS S2 mini boards (Lolin v1) using ESPHome over USB via the "manual" mode. That alml worked fine, as long as I put the board in boot mode (press…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Trying to get the Bluetooth working and having some issues.
Question:
1- Do I have to compile a custom toolchained build of openwrt to get bluetooth LE working based off of the commit on the RE…
-
**Describe the bug**
The encoder EQEP0 return only three values -1, 0, 1.
**Describe which image you are running (example: bone-debian-10.2-iot-armhf-2020-02-03-4gb.img.xz) **
bone-ubuntu-18.04.…
-
Hallo,
I'm dealing with TWI right now. I noticed that your naming scheme is not 100% the same. The TWI buffer length '_BUFFER_LENGTH_' should have the name TWI_BUFFER_LENGTH. Otherwise it will be t…