-
This code looks wrong.
https://github.com/mcci-catena/arduino-lmic/blob/896fb808eae627ae18c4a3b01a66fd411c857ec9/src/lmic/radio.c#L426-L435
1. If `pw` is 16, it will pass through unchanged, but …
-
Hai ,
Iam new to lora,
Iam using this example https://github.com/mcci-catena/arduino-lmic/tree/master/examples/raw-feather and i configure config.h file to (#define CFG_in866 1 and #define CFG_sx12…
-
While build the Catena4450m101_Sensor faced some minor issues. Listed it below.
1. gk provision key not found
Issue :
> Arduino: 1.8.2 (Windows 7), Board: "Adafruit Feather M0"
>
> C:\Users\…
-
Hi there and thanks for sharing your code fork. I'm running with your feather example. I'm using a Adafruit Feather 32u4 with LoRa Radio Module MCU. This Feather 32u4 LoRa Radio uses the RFM95W 868/91…
-
From @svelmurugan92:
adjust_millis_forward function not declared.
Issue :
> Arduino: 1.8.2 (Windows 7), Board: "Adafruit Feather M0"
>
> E:\ThingsNetwork\Things-Network-Chennai\source\MCCI…
-
Many paragraphs could be written about the provisioning philosophy for the older Adafruit-based LoRaWAN Catenas. It boils down to including a file that's outside the normal distribution tree. Unfortun…
-
Our first tester cloned arduino-lmic as "arduino-lmic-master", and this revealed that there are links internally to the source tree that require that the libraries have expected names. We need to docu…
-
Compilation fails with version [5395e](https://github.com/mcci-catena/arduino-lorawan/commit/5395e962719d0153db3a28f4f4a7485277fb4ab5) of the library, because eu868 support was not properly implemente…
-
If you use the BME280 in sleep mode (to minimize power consumption), you can get bad data when making measurements if you let the device go idle.
- Version: [ede7bf3](https://github.com/mcci-catena…
-
Hi,
I've been having trouble implementing an Adafruit 32u4 Lora node that honors the TTN frequency plan at 915MHz... this fork made some improvements over the Things-NYC in that the channels seem t…