-
Hello Eric,
I have a Horus X10 with a Dragonlink v3 configured to mavlink transmission.
My setup is Pixhack v3 (Ardupilot 3.9.2) ---> Dragonlink microRX ---> Dragonlink TX (with MavLink Decoding) …
-
I hope this is a OpenTX related problem.
My full Crossfire TX is powered if I plug in USB for loading. Is it a bug or a hardware problem?
After loading finished the module is still powered and I thi…
-
With (my) Horus X10S/w TBS Crossfire Micro TX module, when enabling the internal BT module, the telemetry data is not forwarded to/transmitted from the internal BT module. The feature however works fi…
-
-
是否为新品(必填)
新品
关联的产品名称(必填)
米兔儿童牙刷
项目ID(必填)
PRJ18-SOOCA-X-003
企业名称(必填)
舒可士(深圳)科技有限公司
环境(必填)
电脑操作系统:[Mac OS]
手机系统:[iOS 12.2,iphone6]
SDK分支: [master]
相关模块:[File]
现象(必填)
使用file.downl…
-
1. Quadcopter with iNav 1.9.0, Telemetry receiver R-XSR.
2. Taranis Q X7 sees RSSI and receiver VBat voltage (I haven't connected R-XSR s.port to iNav yet) and supposedly should also be able to tran…
-
Hi everybody.
Creat this account , becouse i think this is the only place where i can find help.
I know i know that should be moust simple step to do but for some reason i cannot calibrate my acce…
-
问题描述:
在Fragment 使用Viewpager+Fragment。在子Fragment的子Fragment中使用 StandardGSYVideoPlayer,播放前几秒或前十几秒卡顿,是在低端机下卡顿 视频总长度 1m20s.
不点播放 操作和滑动都很流畅。
看了之前 Closed 的Issues 也出现过这个问题。但是我是在Fragment的子Fragment中使用。
问题…
-
Hi Crazydude,
I'm an electronics noob and I don't fully understand the various symbols in the diagram for hooking up the inverter.
Please could I ask you do describe in words below the diagram w…
leeph updated
5 years ago
-
I have receiver FrSky R9 Slim, flashed to the newest available EU/LBT firmware, also the module R9M si flashed to newest available EU/LBT firmware. The receiver is connected via dedicated S.BUS port (…