-
Hi there,
I'm getting an error when trying to compile:
```sh
λ cargo run
Compiling sungrow-winets v0.1.0
error[E0119]: conflicting implementations of trait `Debug` for type `RunningStateBi…
-
### The problem
Using Modbus for Sungrow inverter.
After the latest update this does no longer work:
Logger: homeassistant.config
Source: config.py:501
First occurred: 22:12:45 (1 occurrences…
-
Hi there,
I have a SH5.0RS and SG5.0RS Sungrow inveter based setup. The SG reports all generated power as “load_power” which is interpreted as consumed, while all the export is reported by the SH i…
-
...ich schreib mal auf deutsch, weil is ja irgendwie typisch deutsch...
Ich probier das gerade alles aus und mir sind gleich zwei Sachen aufgefallen. Wenn ich das zum Laufen bringe hier, kann ich d…
-
Is it possible to configure fill to be between line and zero? I want to mimic the graph below from Sungrow's iSolarCloud. Presently the fill appears to be between line and bottom of graph regardless o…
-
Unknown temperature.
I was getting temperature with SunGather integration, however it was not correct, +15 degrees of actual. Not sure where's the issue.
![temperature](https://user-images.githubuse…
-
### Feedback
I want to configure my energy dashboard as I have a new solar roof.
However, from this documentation page I cannot learn what type of sensor I should select for the PV production.
I ha…
-
This is probably issue with home assistant itself, as I am getting this with other integrations as well.
When I select EMS Mode to, for example, Forced mode, it selects fine. However, if the mode is …
-
### Describe the bug
- Fahrzeugladung soll nur mit PV Überschuss erfolgen
- Ladevorgang startet nur erfolgreich, wenn beim Anstecken bereits PV Überschuss vorliegt
- Meldung Weboberfläche: "Ladeber…
-
Though the repo clearly states that the code is intended for HVS batteries, I would like to know whether it is known if LVS batteries are also supported?
Also onto which version of the BYD CAN protoc…