-
Clonging private libs when using a SSH agent is broken on linux since bc73437230943959a297d32db35d5f9a6c939b5a.
```
ads1015-i2c: Does not exist, cloning from "gitea@git.sama.re:proxiwash/ads1015-i2c…
-
## Description of Issue
Tested example sketch from Adafruit ADS1X15 library, uploaded to leonardo and tested in serial monitor. Runs fine.
Created a small sketch to get readings and set joystick a…
-
To be replaced by [Adafruit_CircuitPython_ADS1x15](https://github.com/adafruit/Adafruit_CircuitPython_ADS1x15) and [Blinka](https://github.com/adafruit/Adafruit_Blinka).
For historical reference, m…
-
[proposed Label] enhancement
I am running this library on a TX1 along with the Adafruit_Python_ADS1x15 library in order to use the ADS1015 chip through the built in I2C port.
I modified the I2C…
-
I also tested `sys-2-crypt`, `make` worked, wrote `whole.img` to a USB stick. At bootup, it asked for a passphrase, however, the keyboard was dead.
This is on a PC with a UEFI-BIOS HP motherboard, …
-
Hi,
I'm trying to re-implement TI ADS1015 ADC interface using brzo_i2c library, since Adafruit's implementation using Wire.h is not fast enough to read data at the rate ADS1015 cat produce.
On th…
-
Hello,
for the ads1015 i have a problem with your driver. I had to delete the gain on this
ads = ads1x15.ADS1015(i2c, addr)
by adding the gain i have this issue
function takes 4 positional argume…
-
Your Readme file is more advertising, compliments and pictures than instructions.
### 建议
* use markdown lists for features
* use *w/* with consistancy
* use code block for code instructions
…
-
The time delay between i2c write and read operations is insufficient to cover the natural part to part variation of ADS1x15 devices. The consequence of this is that some parts return the previous read…
-
Hi,
I've been using Cloud aRest for a while, however I detected a problem.
After some Hours, device ID becomes unusable, by giving Error 504 like the following image:
![screenshot from 2017-05-14…