-
### Bug Description
Nozzle to probe offset is ignored. Probably on X and Y axis.
### Configuration Files
Not relevant
### Steps to Reproduce
Compile latest 04c4c6004e752582235357b14aebd…
-
### Bug Description
Enabling DGUS_LCD causes compile errors in both Arduino IDE and PlatformIO
### My Configurations
**Required:** Please include a ZIP file containing your `Configuration…
-
**Marlin Version: 2.0.5.4**
### Bug Description
When uncommenting to define STATUS_HEAT_PERCENT following error appears at compiling time:
```
Marlin\src\lcd\dogm\status_screen_DOGM.cpp:…
-
### Feature request
Integrate the DWIN DMT48270M043_02WT used in the Wanhao and Monoprice touch screen printers.
This LCD interface is being used in several private Marlin builds. It would be a…
-
With ```DGUS_LCD_UI_ORIGIN``` defined in Configuration.h it was necessary to enable
```
constexpr uint16_t VP_Fan1_Percentage = 0x33A2; // 2 Byte Integer (0..100)
```
in:
https://github.com/…
-
### Bug Description
z-offset does not change live when using the tuning menu. I even cranked it all the way down to -6.72 without a bed crash.
### My Configurations
@CRCinAU for configurati…
-
Hi, I have a mks1. 4 board and I want to connect a fystec lcd screen when downloading the program. I see this message. I have a problem, I have another question. What are the appropriate settings for …
-
I was planning to file a bug report, saying that Stepper Control seems to be implemented as "all or none", rather than each motor enable/disable being controlled individually as it is on my Ender-3, b…
-
### Bug Description
Enabling Maylan LCD into the configuration file, the serial1 (the one on the TFT pins) continue to output unencoded command. Tried on STM32F1 board and able to see the encoded M…
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…