-
Somes notes for the R2 to consider
* ~~Keep the ADS1015? Either bad batch in the first run or very temperature sensitive when soldering...~~ no need for that anymore
* Add a reset button instead o…
-
### Version
1.41.3+win64
### Operating system type + version
Windows 10
### 3D printer brand / version + firmware version (if known)
Duet3d
Duet wifi 2.02(RTOS) (2018-12-24b1)
### Behavio…
-
Would be a useful feature to be able to tell from a distance whether the hotend is cold (e.g. green), heating (yellow) or hot (red).
An option for ambient (low light), working lights when repairing …
-
Version is: RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02(RTOS) running on Duet WiFi 1.02 or later
I have a homing macro that sets some different parameters for stepper drivers (for the sake…
-
Just an idee:
Wouldn't it make sense if people claim ONE STL file at the time they are converting to STEP / Fusion 360? Or making a conversion status list:
| STL | Part of STL | Who | Status | ETD…
-
Pause is no longer executing moves from the buffer but Cancel still is.
You might want to leave this one open until I can confirm it's actually fixed. :)
-
the closer the input terminals are to output the better
while on terminals make sure they can handle about 15A just to be on the safe side
and for FET's pick ones that has as low on resistance a…
-
Hi is working duet wifi with thil LCD12864 + sd + encoder?
-
Greetings,
I'm testing 2.0.0-RC4. Testing with RepRapFirmware for Duet 2 WiFi/Ethernet 2.02(RTOS) (2018-12-24b1)
I've been switching between my Mac using either Safari or Chrome, and my iPad wi…
-
#### Description
While the connection with the board (a Duet3D Ethernet) is working normally and homing is correctly done, when trying to jog the commands are queued and sent only when asking for s…