-
I opened Tor on port 9050 and while running Torpinger I encountered the following error:
```
root@kali:~# python3 torpinger.py
[9050]
Time out
Time out
Time out
^C
Cancelled run forever operatio…
-
Running dev-4.7 with @amboar's ftgmac100 fixes on an ast2500 platform with NCSI, we boot and bring up the device:
```
# ifconfig eth0 up
ftgmac100_open
ftgmac100_reset_hw
ftgmac100_init_hw
ftgmac100_…
-
When this issue occurred, we can't restart eth0 device with SIOCSIFFLAGS error.
The details can be referred to the original issue [phosphor-networkd/issues/18](https://github.com/openbmc/phosphor-netw…
-
```
# ifconfig eth0 up
[ 15.270000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG
[ 15.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG
[ 15.280000] ftgmac100 1e…
-
I'm not familiar to network initialization, so attach to the journal log and capture some strange messages for your information.
Welcome any suggestion that can help me to debug this issue.
- obmc v1.…
-
We should warn when this happens, and/or not enable NSCI. Currently it fails silently.
-
[ OK ] Started Clear one time boot overrides.
```
[FAILED] Failed to start Phosphor IPMI BT DBus Bridge.
See 'systemctl status org.openbmc.HostIpmi.service' for details.
[ OK ] Stopped Phospho…
-
Sometimes BMC needs more than 30s to finish the jobs when RMC communicates with BMC continually.
Per OpenPower Host IPMI Spec [(here)](https://github.com/openbmc/skeleton/blob/master/pychassisctl/chas…
-
While fixing another networking issue I've noticed that if many tftpboot commands are run on the BMC eventually the NCSI layer stops initialising properly rendering the networking non-operational on t…
-