-
I'm trying to provide a means by which my OS can change the CPU model (before it starts running) that it claims to support by using the new `ctl_set_cpu_model()` functions. However, I'm getting segmen…
gerph updated
2 years ago
-
Hi Team, thank you for your work on this library, I have been using it on an Arduino.
Apologies in advance if this is documented somewhere and I haven't seen it.
An issue I have come across with…
-
Good day,
I've got a Forlinx SOM with 2GB DDR4 RAM & 8GB eMMC. I'm manually building u-boot for the NXP i.MX8M mini processor.
The code used are all from source.codeaurora.com, tag: lf-5.10.72-2.2.…
-
This issue is so there is a place to track troubleshooting. I realize the Broadcom build is pre-alpha....
I have built CP for both the RPI Zero 2W and the 4B.
When I connect a USB to Serial conver…
-
Hello friends, I tried to put the firmware into emmc to start, it seems to fail to start, it seems that he can't recognize the boot partition in emmc...
```
=> DDR Version V1.10 20210810
In
ddrc…
-
Hi, after following the instructions in the README, then I have built and burned firmware success, but the kernel didn't work. Following is log boot
NOTICE: CPU: STM32MP157CAC Rev.Z
NOTICE: Mode…
-
Thanks for your work! I am confused , does the gradient branch participate in backpropagation?
-
Hi everybody. I'm stuck and I really need help. I just signed up on github so if this is not the right place to post this please excuse me and do the appropriate modifications.
I have no idea what el…
-
Hello, thanks for the great works. Could you kindly add support for the n76E003at20 chip from nuvoton. Thanks
-
谢谢作者开源代码,我也想做这方面的研究,
请问下 Depth_raw 文件夹下面的1600*1200 深度图GT 是由DTU 的点云GT 生成的吗
具体是怎么生成的呢 有没有可以参考的代码 谢谢了