-
Hello,
I have a problem...
Two profiles, the first created with Ender 3 pro, the second with SOVOl SV02.
Same parameters. Same values. However, support are different, and i have some problem on c…
-
### Bug Description
Unsure what is changed between 2.0.5.3 and 2.0.6.1 but when my configs are adapted to the new version and FW flashed to machine, when I perform an auto home, when command G2…
-
Good morning,
I am fairly new to modding firmware for 3D printers. I have an SV01 and have been using your firmware for about 9 months now.
I'd like to make some tweaks to test, but I'm not sure…
-
### Bug Description
This ticket is aimed to report a correlation on a common but hard to reproduce issue across a variety of unrelated users and configurations. I have been following older tick…
-
### Description
Would you consider changing #define DEFAULT_MINSEGMENTTIME 20000 to 50000 in the next release in Configuration_adv.h?
I've been researching OctoPrint print quality issues and th…
-
I'm looking to swap out the OEM lcd with the TFT35 E3 by BTT. Looks like it needs this port to enable the Touch Screen functions.
-
I just assembled eleksmaker a3 laser and would like to change it's mana controll board which runs grpl on arduino to grbl_esp32 (grbl upload over wifi, faster mcu, ...)
I tried to look up the docum…
-
I am using a Sovol SV01 which is shipped with Marlin 1.6.1. I have upgraded it to Marlin 2.0 using the latest version from CopterTec (https://github.com/CopterTec/Marlin-Sovol_SV01/releases).
The pri…
-
config link in readme is no longer valid.
Needs to be updated to https://github.com/MarlinFirmware/Configurations/archive/release-2.0.5.zip
source: https://github.com/MarlinFirmware/Marlin/tree…
-
I am replacing my factory main board with a V2.2.1 board (https://smile.amazon.com/gp/product/B085DM75Q6/ref=ox_sc_act_title_1?smid=A3SNVVMEXOSKIB&psc=1)
Have you heard of any issues running the cu…