-
Hi Romain, since a couple of days, I have a weird issue with my Velux roof windows (Connexoon):
Open / Close are completely messed up: they are closing when they should open and vice versa.
Please, …
-
Es wäre schön wenn es für den Netatmo/Velux Active einen Adapter für IoBroker gäbe.
Hier gibt es bereits was auf GitHub
https://github.com/nougad/velux-cli/blob/master/velux-protocol.md
-
Hallöchen,
ich möchte meine Rollladensteuerung überarbeiten. Die Rollladensteuerung aus der node-red-contrib-sun-position scheint dafür ideal zu sein. Doch irgendwie scheitere ich schon an einer Ba…
-
Hello ,
the Adapter is not starting.
This ist the Log from iobroker.
host.raspberrypi | 2019-11-21 20:10:21.092 | error | instance system.adapter.velux.0 terminated with code 10 (Cannot find st…
-
> The Somfy Telis 5 RTS provides the interface to the radio signal. I use this unit as it is and just solder wires to the button lines to control them automatically. The buttons seem to be connected t…
-
For Duette shades, the top position of the shade is also steerable, but this is not supported by the binding.
Supporting this is only a matter of a new channel and adding a parameter `position2…
-
Hello,
and thx for this great library.
I'm trying to control my venetian blind. Moving it already works quite fine, the only thing that i couldn't realize at the moment is moving the slats.
As…
nr001 updated
4 years ago
-
Velux released a new firmware (0.2.0.0.71.0) for the KLF-200. Unfortunately, there are no release notes. It would be important to know, if this library is still compatible with the new firmware.
-
In the States UI thermostats appear with the ability to select one of the 4 KNX Operation Modes. With 0.97 the Lovelace Card only displays 3 Operation modes and these do not work to change the Operati…
G8YTZ updated
3 years ago
-
Hi @PLCHome, any plan to support the latest 3LG E01 Velux Gateway?
Or do you know some existing Node-RED port I would have missed?