-
I set the ESS Charge schedule to charge at 02:00 for 3 hours. It started 04:00 local time
I am 2 hours ahead of UTC
It was found in "VenusOS 2.80-11-large-20", but could probably be a bug in other…
-
Is there a command line tool to download/upload and read/modify the config from multiplus devices, outside of the main Victron Connect application?
-
**Describe the bug**
**To Reproduce**
Steps to reproduce the behavior:
Connect the MGod BMS via RS485 to USB cable to Raspberry Pi.
Logs would be like:
```
root@raspberrypi2:~# tail -f /data…
-
**Describe the bug**
Minimum cell voltage on D-Bus has value `False`; instead of a numeric value. Seen on the system of de Longis which ahs a Daly 4S BMS, running the sinoweath protocol (?).
This …
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to Cell Number
4. See error All Cell Numbers are one to hi real …
-
**Describe the bug**
I installed the package manually on a dev build of VenusOS (2.70~17), ran basic ethernet configuration and enabled SSH to install this package.
I have two USB TTL adaptors ins…
-
I am using VenusOS on a Raspberry Pi for testing purposes and it seems that the default account setup is against security best practices:
- Root login should be disabled with all access which requi…
-
There are a lot of us out there that don't want to/ can't upgrade to V2 of influxdb.
It would be really nice if we had the option of staying with the 1.x implementation.
-
Hi Devs,
I have connected a Shipmodul miniplex to the raspberry pi with VenusOS 2.70 large image installed and SignalK enabled. I have added the serial nmea 0183 connection in the data sources but …
-
3S And 4S BMS have different communications.
My contact at Daly says this should be the document that describes the communication between 3 and 4S BMS and PC.
[Daly RS485+UART protocol.pdf](http…