-
V2.2.2 is online :)
https://physics.princeton.edu/pulsar/K1JT/wsjtx-2.2.2.tgz
-
I saw in your list of supported software you include GQRX and GNUradio, and in supported hardware I see a few older Airspy devices. SDRplay and the AirspyHF+ devices are pretty popular, and they are s…
-
hello,
I've got this kind of error below :
> Warning: failed to XInitThreads()
[INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106700; UHD_3.13.1.0-3
gr-osmosdr 0.1.4 (0.1.4) gnuradio 3.7.13.4
…
-
I'm having an issue where, intermittently, my control channel(s) will fail to decode, and the only fix seems to be control-c and restart ./recorder, hoping for success. Once it works, it works, until …
-
```
2020-08-03 09:19:50,563 - owrx.__main__ - INFO - OpenWebRX version v0.20.0-dev starting up...
2020-08-03 09:19:50,661 - owrx.sdr - INFO - SDR sources loaded. Available SDRs: SDRPlay RSP2
2020-0…
d9394 updated
4 years ago
-
Hi Oros42
I am new to telephony and wanted to try your programs.
But, I have difficulties to run scan-and-livemon, gr-gsm and grgsm_livemon: I get segmentation fault each time.I am using RTL2832…
-
I grabbed sox via apt-get, fdkaac was not available that way so I compiled that. Grabbed the updated trunk-recorder files and make ran fine. No changes to the config or anything else. I saved the old …
-
I get through all the cmake stuff OK I think.... I see this:, but my interpreatation is that libsoxr does get found and it is there when I look:
-- Checking for module 'libsoxr'
-- No package '…
-
SDR = AirspyHF+
-
The airspyhf+ has its own SoapySDR module: https://github.com/pothosware/SoapyAirspyHF/wiki
and only works with CF32:
```
$ soapy_connector
Tuner gain set to 0.00 dB.
IQ worker thread started
…