-
When I trigger a optimization I’m getting the following error logged in the docker container's output:
```
2022-10-01 11:25:58,714] INFO in command_line: Setting up needed data
[2022-10-01 11:25:…
-
What can be the reason for the sensors mentioned switching off again and again and no longer supplying any values? I'm new to home assistant and don't really understand the connections yet. Many thank…
-
### The problem
Upgraded from 2023.8.4 to 2023.9.0
After upgrade
Core connects to 2 modbus servers via rtuovertcp
After aprox 5mins all registers become unavailable
Modbus has been rock solid…
-
### Describe the bug
Ladevorgänge werden in die SQLITE DB evcc.db gespeichert, allerdings wird diese nicht unter Ladevorgänge im UI angezeigt. Des Weiteren sind die Werte meter_start_kwh, meter_end_k…
-
Issue reported here: https://community.home-assistant.io/t/sungrow-sh10-rt-modbus-integration/361356/64?u=mkai
On SH*RS there is no running_state available.
Circumvent this using some logic. Tes…
-
It would be great if this supported the SG15RT inverter.
https://www.rpc.com.au/pdf/sungrow_SG5.0-20RT_datasheet.pdf
-
### The problem
After core update to 2024.4.1 Modbus fails to read data fom any register.
### What version of Home Assistant Core has the issue?
2024.4.1
### What was the last working version of H…
-
I am looking for SAPPHIRE-H_B000.V000.P005-20220727.zip
-
Last Thursday (2023-02-16) I had an SG5.0RS installed, replacing an older inverter from a different vendor.
This is my first Sungrow. I've been trying to follow your README but I'm stuck.
I'm fi…
-
### Discussed in https://github.com/evcc-io/evcc/discussions/7444
Originally posted by **TecTim18** April 14, 2023
Hallo zusammen,
leider bin ich mit dem Update 0.116.0 nicht ganz so zufrie…