-
```
root@blueos:~# /home/pi/services/beacon/main.py
2022-10-20 20:46:04.414 | DEBUG | commonwealth.settings.manager:__init__:33 - Starting beacon settings with SettingsV3, configuration path: Non…
-
### Bug description
cmdline.txt is corrupted after running installation script, resulting in kernel panic at boot.
The content after install is:
`console=tty1 root=PARTUUID=2985b382-02 rootfsty…
-
This helps vlc and others programs to run streams without much user configuration
-
Accessing directly with the hotspot IP (192.168.42.1) everything works fine, but the MDNS (blueos-hotspot.local) does not.
Apparently I forgot to add a new version of the beacon settings.
Reported…
-
### Which node are you reporting an issue on?
node-red-node-serialport 1.0.1
### What are the steps to reproduce?
Design a Flow using nodered 2.2.2
The design must have node-red-node-serialport …
-
Discovered two bugs in the mavlink2resthelper.py file:
1. Import in line 1 references companionhelper, should be blueoshelper.
2. The GET requests in line 175 and 186 are failing due to incomple…
-
Presently the [angles sent to ArduSub](https://github.com/bluerobotics/BlueOS-Water-Linked-DVL/blob/master/dvl-a50/dvl.py#L361-L362) are hard-coded as 0s, which may be messing up its attitude estimati…
-
The problem is very straightforward:
- We are now advertising via MAVLink the same IP as the user chooses as the stream endpoint when creating the stream
- We are still restricting RTSP streams to…
-
### Bug description
When running the network test, the upload speed sometimes seemingly gets measured but then doesn't display in the frontend.
Raised in [this forum post](https://discuss.bluerobo…
-
We usually have a warning on blueos saying that the user is connected via wifi, that's not showing on hotspot