-
My issue is:
When running cuckoo under the cuckoo user (with the . ~/cuckoo/bin/activate environment) it is producing the error, "CuckooCriticalError: Please update your configuration. Unable to shut…
-
I'm reporting this here per the request of @khwilliamson and @atoomic.
I audited the `perl ppport.h` recommendations for all of our dist modules and have submitted pull requests where the recommen…
toddr updated
2 years ago
-
please help,
I am new at linux and I am using a virtual machine to run a raspberry pi OS. I noticed the sonic pi, but when I tried it gave a boot error so I uninstalled and tried to install another…
-
### Issue details
I'm using the mavros/set_mode ROS service to set the mode of the drone. This is how I'm using it:
In __init__
```
service_timeout = 30
rospy.wait_for_service('mavros/set_m…
-
**Describe the bug**
Excuse me, based on https://github.com/bytedance/byteps/blob/master/docs/step-by-step-tutorial.md, when I run distributed training with RDMA, the scheduler will print the follow…
-
### Describe the bug
At random, interrupts from a gpio line are received by the interrupt handler twice. The problem is present only with a 64 bit system, while 32 bit systems are clean
### Step…
-
**Describe the bug**
We are using ``ioctl(fb, FBIO_WAITFORVSYNC, &dummy)`` to capture monitor timings for a program that directly writes to framebuffer (we have commented out dtoverlay=vc-fkms-v3d …
-
Hey i don't personally own a ZuluSCSI device but am using the 4 bit SDIO implementation of ZuluSCSI. I ran into some limitation in terms of write speed and got stuck around 10 MB/s and the latency of…
-
**Describe the bug**
Using the v4l2h264dec decoder in Raspberry Pi OS 64 bit with GStreamer 1.19, the video will reproducibly slow down extremely/hang after 20-80 minutes on some Raspberry Pi 4B 4GB …
-
**Is this the right place for my bug report?**
This repository contains the Linux kernel used on the Raspberry Pi. If you believe that the issue you are seeing is kernel-related, this is the right pl…