-
Hi, I don't have that much experience coding, I do have coded in other languages but nothing strong on C like this; anyhow, I used the fork by Thog, which is for Kernel 4.14; Everything compiles fine,…
-
```
Reproducing the problem:
1. Try to enable telnet with lower-case or mixed-case MAC address
2. Telneting in won't work
Fix: Enable telnet with the MAC address's characters (A-F) in upper-case.
W…
-
```
Reproducing the problem:
1. Try to enable telnet with lower-case or mixed-case MAC address
2. Telneting in won't work
Fix: Enable telnet with the MAC address's characters (A-F) in upper-case.
W…
-
I'm using a Netgear r7000 with fresh tomato installed and updated, on a Mac. I've forwarded the ports in the router software and allowed incoming connections for the Pi Network and Docker. I've checke…
-
Hi there!
I am trying to enable telnet on an RAX50 with FW version V1.0.12.120_2.0.83 (the same as mentioned in the supported devices list). However, when I run the command, I only get this output …
-
[Google Groups](https://groups.google.com/forum/#!forum/idris-lang)
imuli updated
8 years ago
-
```
Reproducing the problem:
1. Try to enable telnet with lower-case or mixed-case MAC address
2. Telneting in won't work
Fix: Enable telnet with the MAC address's characters (A-F) in upper-case.
W…
-
Hello,
First, thanks a lot for releasing this driver, it helped me a lot to get my netgear AC600 (Realtek RTL8811AU) work !
The wireless connection works very fine. However, I get some kernelOops er…
-
Version: 0.5.2
Router: Netgear R8000
Use case: homeassistant 0.89.2 device tracker
When I configured my device tracker and booted up homeassistant, I can no longer access the router's web ui via …
-
- package wifitoggle, as-is
- package restorefactory, with some configuration
- LED configuration?
#### LED Configuration Notes
From the Netgear setup guide ftp://downloads.netgear.com/files/WNDR3700…