-
There are 2 Arduino UNO boards with Lora SX1278 available, but there is no SPI support at the moment, implementation is necessary if possible, thanks.
-
Hi,
When calling beginFSK with enableOOK set to true, then line 51: "`state = setDataShaping(RADIOLIB_SHAPING_NONE);`" fails.
When enableOOK is true, then setDataShapingOOK should be used instead …
-
Hello @jgromes
I am experimenting with two Ebyte E22-900M30S modules which use the SX1262 chip + PA, on an **ESP32** platform
I have tried your examples supplied for this chip, and they work well -…
-
**Describe the bug**
Hi
I'm facing an issue of receiving messages when I change SF to the target SF I expect to receive messages by.
The change is using radio.setSpreadingFactor();
**To Re…
-
Hi,
I have an ebyte e22-400t30d module. This module is based on sx1268 chip and has uart interface. It's easy to program, but there is no access to the sx1268 chip settings. I want to establish commu…
-
This is really just a request for clarification on reusing the lora code. Trying to get an MCU using the Arduino LoRa library to work with a pico using this project.
I have an ESP32 Lolin32 Lite li…
-
I'd like to request a function to be able to change the CRC calculation type for SX127x. Or at least the SX1276.
The existing "SetCRC" function is in the SX1278 specific library, so maybe it should…
-
- Version of LMIC being used: 3.3.0
- Version of Arduino IDE being used: 1.8.13
- Network provider (The Things Network, Swisscom, ChirpStack, etc.): The Things Network
- Region (EU868, US915, etc.)…
-
Hi
Investigating (again) in the difference between SX1278 and SX1276 implementations (please tell me). to mimic the change to the other library that's used in STM32CubeIDE.
I saw something that…
-
From the register description of data sheet, it seems the code should be changed to
void LoRaClass::explicitHeaderMode()
{
_implicitHeaderMode = 0;
writeRegister(REG_MODEM_CONFIG_1, readRegis…