-
Sorry I probably missed something, but Serial2 communication keeps restarting my ESP. I use Arduino CNC shield (on GRBL side) so I use logic level shifter, I tried several of them , I tried various p…
-
```
I want to first let you know that I love what I see that your project does in
the videos, and I have lots of ideas to add to the project, that I will share
as much as you please. I am an Android…
-
Hey guys
I bought a EspDuíno (Esp32) and I want to insert it into the CNC Shield just like you do with the arduino board. I did all the GRBL-ESP32 installation procedure, it is running fine, but ever…
-
I used Arduino Due R3 and Wiznet W5500 Ethernet Shield. I put micro SD Card 32 GB in the ethernet shield. When I ran my code and opened the serial monitor, it appears error like this:
`Can't access S…
-
Hi, I'm using this library to write the files that I transfer from my PC to the SD card via Arduino. However when I open a file, read it's contents, close it, then
create a new file write the conten…
-
Identify parts including
- passive components and their values
- All chips and their datasheets
- shields and arduino
- find prices
This task could be broken down if this appears like too much …
-
The Arduino GSM Shield (http://arduino.cc/en/Main/ArduinoGSMShield) is a fantastic resource for a number of reasons, of which a major one is the tedious AT Command configurations are all done through …
-
Hi, I'm using an arduino nano 33 ble and the online Arduino ide which Arduino IDE version 1.8.13.
I've imported the libraries and can't get a single example to run, they compile (once the SPI initia…
-
### use arduino 1.85
lora Dragino Lora Shield+ arduino+dht11 as lora end device
send data the Ttn Network
#####
when compile
======
### __rror: 'dht' does not name a type…
-
This looks like a great project, however I do not seem to get it working with my setup.
I am using a Arduino nano Every with a CNC shield nano, stspin820 drivers and a nema 17. After uploading the …