-
**Describe the bug**
after booting the newest version of raspios (May 7th,2021) with a Pi3B without ethernet connection I can't connect to a local network via ETH anymore. Plugging in the ethernet ca…
-
Any possibility to get this working on Ubuntu?
I almost got it to work by cloning linux sources (v5.4) and including sound/usb/{midi.h, usbaudio.h} from there.
I'm unsure if doing this correctly (n…
-
### Issue details
When publishing to /mavros/rc/override topic, we don't get any change for topics /mavros/rc/in or /mavros/rc/out.
Everything look fine, we managed to arm the vehicle through serv…
-
Recording from the camera (especially when using multiple splitter ports)
and sampling the I2C bus (1 or others on RPI4) simultaneously randomly throws:
**errno 5** input output error or **errno …
-
**Environment**:
- **Target**: ESP32-S3
- **ESP IDF**: v5.1.4
- **Compiler**: esp-12.2.0_20230208, xtensa-esp32s3-elf-gcc and xtensa-esp32s3-elf-g++
**Issue:**
When we try to compile our projec…
-
It seems that audio/video sync in Qubes is not quite perfect, and worse than native. Looking at A/V sync tests it seems the audio might be 50-100 ms delayed on my machine.
I have only tested this sub…
-
### Describe the bug
rpi-eeprom-update doesn't list the latest VL805 firmware update until after it has been installed.
```
root@pi-taucha:~# rpi-eeprom-update
*** UPDATE AVAILABLE ***
BOOTLOA…
-
I would like to know if it is possible once openIpc is installed on the Wyze V3 if one can use a usb hub with wired lan (eth0). I have a few adapters and the Wyzev3 /openipc camera boots but doesn'…
-
**Describe the bug**
A standard `sudo apt update; sudo apt upgrade` failed with `'/boot/overlays/ilitek251x.dtbo': No such file or directory`.
Repeating the commands says "all packages are up to…
-
### Describe the bug
The bosch,bmp380 family of iio sensors is supported in the 6.1.21+ kernel, but it is not supported by the i2c-sensor device tree overlay.
```
# dpkg -S /boot/overlays/i2c-se…