-
**Application Version**
All
**Platform**
All
**Qt**
N/A
**PyQt**
N/A
**Display Driver**
N/A (but it's nVidia 3.56 or there abouts)
**Printer**
I built it myself. Roughly, it's a Mendel…
-
Hello, need a little help setting up DHT22 sensor for my chamber heater. I'm using DuetWifi board with Duex5 connected. I'm using the Temp Daughterboard connector on Duex5 for connecting DHT22 sensor.…
-
Hello, I've finally got the PanelDue to work with my RADDS board using repetier firmware.
but I am still facing a problem that the PanelDue shows that there is no SD card in both case when I use th…
-
Hi,
I have no idea when this started, currently I am on version 1.17+2.
The issue is that the console always repeast previous log messages and does not show message for commands I enter.
This works…
-
Building and flashing works like a charme but i'm not sure how to connect to DuetWifi and what needs to mapped in the Firmware?
I've seen from the Picture that +5V and GND seems still connected to …
-
When I first connect to my Duet Wifi, the User-Defined Macros are empty until I visit the Macros page.
Firmware Name:RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0 + DueX5
Firmw…
-
Great software! I thought I'd be missing Octoprint but I'm quite happy with DuetWebControl so far.
One suggestion though. I'm trying to backup all my .g files, and the process takes a lot of clic…
-
M106 P2 T60 H101 logic seems to be broken and ends up running the fan continuously regardless of the temperature.
M106 P2
Fan2 frequency: 250Hz, speed: 100%, min: 10%, blip: 0.10, inverted: no, t…
-
When I upload the DuetWebControl-1.16.zip file to my Duet wifi, it does not update, but stays at version 1.15c. Am I doing it wrong, or is there something else I need to do?
To upload it, I press "…
-
Hi David,
I tried to enable DMAC controllers in the SAM3X8E processor, in order to connect at high speed hsmci and ESP SPI wifi module (like to DuetWifi) .
When the DMAC controller is initialized in…