-
Hello,
It is feasible to utilize FabGL on an ESP32-S3 board with built-in USB mouse and keyboard support, instead of PS2.
-
Board is `Seeed Xiao ESP32-S3`
-
No matter how i try add in cmake/dependency the error never goes. Added in photo. Sorry for dump question I'm noob. I'm building for esp32 s3
![Uploading IMG20240714233740.jpg…]()
Report and imag…
-
There are some challenges with getting the code to run correctly on the most popular ESP32-S3 dev boards sold on AliExpress etc. First of all, where possible, you should order the N8 version, which wi…
-
Hey there,
I'm trying to use the atecc608a-tngtls chip built in the ESP32-S3-BOX-3. I am using GPIO8 for SDA and GPIO18 for SCL but can't find the device in an I2C scan, nor does it respond to my …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Port, board and/or hardware
ESP32, Arduino Nano ESP32
### MicroPython version
MicroPython v1.24.0 on 2024-10-25; Arduino Nano ESP32 with ESP32S3
### Reproduction
Software and Hardware needed:…
-
### The problem
**ESPHome firmware versione:** 2024.5.5
**Wake word engine location:** On device
When I say the wake word "hey jarvis", sometimes the ESP32-S3-BOX-3B goes into error by showing a …
-
### The problem
I have a Box-Lite that I'm trying to use as a voice assistant. If I try to flash it from the ready made projects page, no matter what I do, it fails to prompt me for wifi credentials.…
-
### PROBLEM DESCRIPTION
On the physical level, there are two or three devices involved with Nuki Hub (one of 2. and 3. is optional):
1. The ESP32 running the Nuki Hub firmware.
2. A Nuki Smart Loc…