-
_From @RickKimball on June 29, 2016 15:56_
The compiler produces a "command-line" warning because the '-' character is used in the board name
MSP-EXP430FR5969LP ( this is true for all boards with a d…
-
[TM4C12x](http://www.ti.com/lsds/ti/microcontrollers_16-bit_32-bit/c2000_performance/control_automation/tm4c12x/overview.page?DCMP=tm4c12x-series&HQS=tm4c12x) is a cortex-m4 processor. It can be used …
-
I git clone the lastest code of px4, and I use make px4-stm32f4discovery_default upload to flash this test firmware to stm32f4-discovery board. I find out that after bootloader the app will dead , the…
-
Apologies for putting a question in a Github issue, but I can't think of a better place to ask it.
I've been trying to compile a hello world LED blink test program for the Blueboard mentioned in the …
-
The Tiva CAN requires a reset of the init bit in the controller when the controller goes into bus off state.
-
I work with 6 tiva boards on a usb hub and I need to flash the same program to all of them frequently. Unplugging usb cables is tedious. Energia18 seems to default to the last usb port in the com port…
-
Hi All,
I am trying to understand and have full control over MPU9250. Hence i started with TI provided BLE stack + SensortagApp. But then it limited me to experiment with accelerometer experiment…
-
SPI speed tops at 8 MHz while MCUs have much faster clock speeds —e.g. 80 MHz for the LM4F120 / TM4C123 and the CC3200 120 MHz for the TM4C129.
How to get 16 MHz for SPI?
-
Add Energia libraries to support USB in F5529 and Stellaris LaunchPads.
-
If the boards names are used as boards tags as it is already the case for the **MSP430**, **CC3200** and **MSP432** boards, then the **TM4C**-based boards tags should be
| Current | Suggested |
| --…