-
I noticed newly added settings in linorobot2_hardware/config/custom/gendrv_wifi_config.h, see below. Just wondering how these settings relate to the magnetometer settings (//#define MAG_BIAS { 0, 0, 0…
-
I believed it should be very simple to fix this but for me it's not simple
################################
Arduino: 1.8.9 (Mac OS X), Board: "ESP32 Dev Module, Disabled, Default 4MB with spiffs…
-
```
Htc one s t-mobile viper rom with android 4.0.4 version the wifi is not
connecting and keeps disconnecting at full strenth its not hardware because i
went back to stock and the wifi works but wh…
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ X] Master
**Esp8266/Esp32:**
- [X] ESP8266
- [ ] ESP32
**Hardware: ESP-12e, esp01, esp25**
Adafruit Feather Huzzah - E…
-
hi,
yet another flicker problem.
Hardware NodeMCU 1.0 LOLIN Amica
when i set up the wifi, the LEDstripe is flickering using FastLED.setBrightness()
i tried the workarounds like: `#define FASTL…
-
Intel Wireless-AC 9260 driver seems to be missing. Bluetooth works fine.
https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html
$ lspci | grep …
-
### Basic Infos
#### Hardware
Hardware: ESP-12 ( WEMOS D1 mini)
Core Version: 2.3.0
### Description
The main issue is that the station disconnects from AP every 5 to 10 minutes when…
-
Hi
I have Allflex cow ear tags that I can read with an RS420 tag reader. I wonder if your code works for this tag.
-
### Board
ESP32 Dev module and LilyGo TTGO LoRa32 V2.1
### Device Description
Routers: Archer C7 and Huawei, Fastgate DN8245f2
### Hardware Configuration
N/A
### Version
v2.0.7
### IDE Name
P…
DigiH updated
3 months ago
-
### The problem
I was attempting to configure LightwaveRF support (https://esphome.io/components/lightwaverf.html) but get a compile error.
Attempted on both ESP32 and Raspberry Pi Pico with same …