-
It appears that although cal data is loaded, the stored LMS DC offset registers are not being written to the device.
This is apparent when opening a device (with an FPGA and cal tables being autoload…
jynik updated
9 years ago
-
While running the (upcoming) libbladerf_test_timestamps `tx_onoff` test, I'm seeing deadlocks when submitting transfers on my Windows box. I haven't seen this in OSX or Linux (yet).
I suspect we ha…
jynik updated
9 years ago
-
In all calls but this one, `dev` is the first parameter.
Can't change the public API now, but when we eventually hit a 1.0.0, perhaps we could swap the order of `stream` and `dev`?
jynik updated
9 years ago
-
I'm seeing this occur on some boards, but not others. (However, I only have a _very_ small sample size).
Currently, I'm digging into this and looking to query the Lime folks on their Google group for…
jynik updated
9 years ago
-
Currently, the bladeRF-cli rx and tx streaming is performed using the async interface. Migrating this over to the sync interface has a few advantages:
- Significant reduction in code (and the complex…
jynik updated
9 years ago
-
issues to start "cal", for start "cal lms".
```
bladeRF> version
bladeRF-cli version: 0.10.7-git-a9ad36f
libbladeRF version: 0.14.0-git-a9ad36f
Firmware version: 1.7.…
-
If a very early FPGA is being auto loaded which doesn't support version readback, the user will be unable to open the device. If they can't open the device, they cannot erase the FPGA region of flash…
jynik updated
9 years ago
-
file_ops.c fails to compile under the docker-mingwbuild environment on the buildbot (https://github.com/rtucker/bladeRF-buildbot/tree/master/docker-mingwbuild):
```
-- Build files have been written t…
-
The following code needs to be fixed so that it appropriately handles timeout_ms = 0.
https://github.com/Nuand/bladeRF/blob/master/host/libraries/libbladeRF/src/backend/usb/libusb.c#L978
jynik updated
9 years ago
-
While working on issue #309, I noticed that there's no support for detaching an expansion board by passing BLADERF_XB_NONE to bladerf_expansion_attach().
@robertghilduta, could you tackle this, given…
jynik updated
10 years ago