-
When reporting bugs/issues, please supply the following information. If
this is a feature request, please simply state the requested feature.
## System
* Pymatgen version:
* Python version:
…
-
The Wemos D1 mini boards use the RT9013 voltage regulator.
They are rated up to 5.5V and the max absolute max Voltage is 6V.
Using a 2s LiFePo4 battery will likely kill it, unless it is nearly emp…
-
Hallo, after SOTA & OMFF activation with mchf trx powered from 3S LiPo Battery i have idea for LOW BATTERY warning (configurable voltage level with some delay, sound or text on LCD) and switch off at …
-
In the process of _considering_ moving house to closer to Palmers Road to reduce commuting (_time_): https://github.com/dwyl/phase-two/issues/11 I got thinking ...
> Hold on, **what _problem_** ar…
-
Ability to change UVCO -> Undervoltage cut out level, settable in 0. 1 Volt increments from 10-24V.
So if you use 4S LiPo it stops at 14.6 - 14.8 V and not 15 Volt..
-
Hi Pawel, hi all,
Using Cheali Charger, I found that the default discharge voltage value for LiFePO4 batteries is 2.0v/element
This value is too low and can damage the battery. I learned LiFePO4 dur…
-
Hi,
I'm having issue with an RPi3 showing a low voltage warning (rainbow box, top right of screen) when powered by a MoPi and 12v LiFePo4 battery. The battery is fully charged and MoPi reports a 12.78…
-
```
Currently the battery voltage range can not be made smaller than 1V. For
instance if the low voltage is 9.4V then the high voltage must be at least
10.4V. The problem is that LiFe packs operat…
-
```
Currently the battery voltage range can not be made smaller than 1V. For
instance if the low voltage is 9.4V then the high voltage must be at least
10.4V. The problem is that LiFe packs operat…
-
```
Currently the battery voltage range can not be made smaller than 1V. For
instance if the low voltage is 9.4V then the high voltage must be at least
10.4V. The problem is that LiFe packs operat…