-
I received my T-Beams today, ordered from here https://www.aliexpress.com/item/33047631119.html?spm=a2g0s.9042311.0.0.67534c4d0mpfJV
I've flashed them with the `firmware-tbeam-EU865-0.9.1` firmware…
-
**Describe the bug**
If the message length is longer than the OLED display there is no indication it has been truncated and no was to see the remaining text. The message is displayed correctly in the…
-
It sounds like some boards are shipped with buggy GPS settings. As a workaround, we should keep a flag in flash to indicate if we've done a factory reset of the GPS and if not, do it once.
-
Please - if you just have a question (i.e. not a bug report or a feature proposal), post in our [forum](https://meshtastic.discourse.group/) instead.
**Describe the bug**
Android app on 0.9.03 wil…
ghost updated
3 years ago
-
**Describe the bug**
Tbeam T22_V1.1 with Meshtastic (v1.0.0 and older) sends invalid GPS position messages to the network, when the NEO-M8N GPS is unsynced, ignoring the GPS `FixType` and `PDOP` read…
-
**BEE2 version:**
4.40.1
**Description of the bug:**
[INFO] utils.setup_localisations(): Language: 'en_US'
[DEBUG] utils.setup_localisations(): Language codes: ['en_US.ISO8859-1', 'en_US', 'en.I…
-
After uninstalling and reinstalling BEE from Portal 2, exporting to Portal 2 still skips copying the compiler, even though the installed compiler is still the vanilla one. Thus, trying to compile a st…
-
Hello,
I can't get message rate more than 1 packet per 1-2 seconds even on Bw500Cr45Sf128 config. I have 2 devices (TBEAM v1.1) on COM6 & COM7.
Send script on COM6 device:
```
import meshtastic…
-
Using a tbeam with EU865 0.7.5 I could not get the unit to pair with app 0.7.71, I tried going back to 0.7.4 but the app was still not detecting the devices. I reported a bug on the app.
Also 0.7.4 w…
-
per @sexycyborg:
> is there any way two of the spare pins could be used for the momentary power switch? It would make enclosure designs a lot easier if we didn’t have to work with those tiny SMD butt…