-
Hi All,
Testing with the latest client / firmware compiled on OS X High Sierra. I can't get lf snoop to work at all, the command executes and completes regardless of what threshold is set. If I use…
-
DIY Spektrum modules built using newer MLP4DSM modules (identified by a blue color dot on the main IC and "DSMX" text on the remote) don't work with the current version of OpenTX (on a Taranis Plus). …
-
Hi,
I am sending 1 LoRa packet (1,2, or 3 bytes long) every second at 915 MHz (125 kHz bw) from a SX1272 LoRa end-node using the program https://os.mbed.com/users/dudmuck/code/sx127x_simple_TX_shield…
-
Hey there,
love your work, it's a great project.
I am experiencing an issue though, I can't seemt to get the ADR to work.
I've set all the paramaters to activate ADR, in the network, profile, and…
-
Dear Christoph,
Greetings. Regarding the use of this great library, I read in one of the opened issues that you only tested it on 12MHz board. What I intend to do is to read data from the antenna r…
-
Dear Christoph,
Greeting. Thank you for your assistance the last time. I am sorry I may sound naive on my request below but I will be very grateful if you could please assist me.
Due to hardware w…
-
### Hardware:
Board: ESP32 Dev Module
Core Installation/update date: 11/jul/2017
IDE name: Arduino IDE
Flash Frequency: 40Mhz
Upload Speed: 115200
### Descript…
-
I was fallowing http://www.cogniot.eu/SW_125KHz_Installation_Instructions%20v1.3.pdf trying to get the scanner to work but I kept getting the above error. It's a raspberry pi 3. I followed the FAQ in …
-
Hi there and thanks for sharing your code fork. I'm running with your feather example. I'm using a Adafruit Feather 32u4 with LoRa Radio Module MCU. This Feather 32u4 LoRa Radio uses the RFM95W 868/91…
-
Hello,
I'm trying to figure out how to configure manual ADR "Set channels" of a node using US frequency subband 2. The channels are:
Index Frequency DR Max Min On
0 903900000 3 …