-
### Describe the problem you are having or the outcome you are trying to achieve.
Hi,
I just discovered your repository as I was using the one from Hunter.
I'm trying to make it work on iOS, I'…
-
### Describe the bug
With `dtoverlay=vc4-fkms-v3d` my CEC-capable TV automatically turns on and changes to the correct input source when the Raspberry Pi is turned on. With `dtoverlay=vc4-kms-v3d` …
-
I currently have the Yi Cloud Dome Camera 1080p starting with 8FUS and I haven't been able to get the camera to connect to Wi-Fi since about 10 months ago. I've tried flashing yi-hack-v4 firmware and …
-
Is there a way to know whether a given frame retrieved from the stream is the first one fully captured with a modified set of parameters? Example: I want to adjust shutter speed, so I write the new s…
-
Hi!
I have a camera board labeled as C26S-V2_Main_V1.1 with a hi3518ev200 SoC.
I replaced the original firmware with OpenIPC but the camera does not work. The majestic binary gives an unknown senso…
-
HDMI CEC isn't working on a LG TV and an HDMI cable that support HDMI CEC (it is working with other devices).
I got this message "[ 1589.659823] Info: dw_hdmi_cec_hardirq stat = 2" on dmesg. Can yo…
-
The Raspberry Pi 4 B has a new brand SoC BCM2711 (1.5GHz Quad A72, VideoCore 6)
- LPDDR4 (1-8 GB)
- VIA Labs VL805 USB 3.0 Host controller (XHCI)
- USB bridge with 2x USB 3.0 and 2x USB 2.0 ports
…
-
### Start with the `why`:
The background is about my need to use the FeatureTraacker Node while using a StereoDepth Node.
At this time, I found that if for OakD or OAK SR, under 1280x800 or 1280x720…
-
**Is your feature request related to a problem? Please describe.**
There are certain regions within the image that tags won't apear, and attempting to detect them in those areas adversely impacts perf…
-
Here are the steps I followed:
In x86 ubuntu 20.08 host;
1- Clone your driver repo
2- Switch to `jetson-orin-nano` branch
3- Run `./quickstart.sh`
4- Edit the device tree for imx568c as
```
/*…