VC-MIPI-modules vc_mipi_nvidia issues

VC-MIPI-modules / vc_mipi_nvidia

Vision Components MIPI CSI-2 driver for NVIDIA Jetson Nano, Xavier NX, AGX Xavier, TX2 and Orin Nano, Orin NX

83 stars 34 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

When starting the imx265c camera on Orin NX, the image is pink instead of color

#122 voyager556321 opened 1 week ago
0
Second camera sensor not working on Jetpack 6 (two IMX412)

#121 fredriktegnell opened 2 weeks ago
2
Support for L4T 36.2 on Orin NX / Orin Nano Devkit

#120 pmliquify closed 1 month ago
0
Error on porting vc_mipi_nvidia module to orin nano

#119 lipingioiopeter opened 2 months ago
0
Add third party vc mipi nvidia module, how to add porting?

#118 lipingioiopeter opened 2 months ago
0
How does orin nano port vc mipi nvida

#117 lipingioiopeter closed 2 months ago
0
IMX264 sensor not accepting colors correctly.

#116 hseysen opened 3 months ago
1
Support for L4T 32.7.5

#115 pmliquify opened 3 months ago
0
IMX264 Camera Not Detected After Following Setup Steps on Ubuntu 18.04 with L4T 32.7.1

#114 Sadegh-Kalami opened 3 months ago
3
Any support for R36.3.0 ?

#113 noob502 opened 3 months ago
1
Configuration VC_MIPI_CAM_0=0 and VC_MIPI_CAM_1=1

#112 fre-wolf opened 4 months ago
2
fix: add prototypes and static declarations

#111 andresmanelli opened 4 months ago
1
Issues with the nvarguscamerasrc and v4l2 pipeline

#110 narbada18 opened 4 months ago
0
Support for L4T 35.5.0

#109 pmliquify opened 4 months ago
1
Patch issue

#108 bratiranjan11 opened 4 months ago
4
Improve documentation: Without correct meta data high there is not timestamp

#107 pmliquify opened 5 months ago
0
ROI width alignment different for v4l2 and GStreamer => improve documentation

#106 pmliquify opened 5 months ago
1
Error description in case of wrong binning/roi combinations

#105 pmliquify opened 5 months ago
0
Error in setting up nvidia-l4t-gputools for L4T 32.7.3

#104 pmliquify opened 5 months ago
0
L4T 36 issues with IMX568 and IMX566

#103 kkhakixyz opened 5 months ago
2
Refactoring of function vc_sen_set_roi

#102 pmliquify opened 5 months ago
0
./setup.sh --target => set standard IP to nvidia and RSA to id_rsa

#101 pmliquify opened 5 months ago
0
0.17.1 TX2NX, JNX30D still imx219 is active

#100 pmliquify opened 5 months ago
0
0.17.1, Jetson Nano with IMX415: Multi-bit transmission error

#99 pmliquify opened 5 months ago
0
Frame rate increase for binning modes

#98 bazo80 opened 5 months ago
0
Support for L4T 36.3

#97 bazo80 opened 5 months ago
1
VC Driver reports Error -34 on boot

#96 s-withers-archangel closed 5 months ago
2
Any plans for Jetson AGX Orin support?

#95 justinblaber opened 5 months ago
1
"demo.sh --argus" does not work

#94 VC-Support opened 6 months ago
0
Check resolution alignments for all cameras, platforms and bsps

#92 pmliquify opened 6 months ago
0
MIPI bus lane speed for IMX250/Xavier NX

#91 taldhous-imetrum opened 6 months ago
0
IMX412 flashes bright and dark in low light

#90 sb3d-tech-mteitel opened 6 months ago
1
JN30A 38346-3 sensor_common_parse_image_props:active_l propperty missing / Failed to read mode 0 / Failed to initialise imx219

#89 Frennz closed 5 months ago
10
Patch failled for L4T 35.3.1

#88 noob502 opened 6 months ago
9
Documentation for frame_rate

#87 pmliquify opened 6 months ago
0
VC Driver installation is always failing For Jetson Nano 4G B01 Board

#86 Frennz closed 6 months ago
7
error: make: *** [Makefile:213: __sub-make] Error 2

#85 ardadi opened 7 months ago
1
Flash Xavier NX on Jetson Nano Developer Kit carrier board

#84 hideyourbugs opened 8 months ago
0
error: ‘tRet’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

#83 RoyAmoyal opened 8 months ago
2
add support vor L4T 35.5.0

#82 flixr opened 8 months ago
1
Support for L4T 35.5.0

#81 flixr opened 8 months ago
0
Support IMX900

#79 pmliquify opened 8 months ago
0
Remove support for NVIDIA L4T 32.3 - 32.6

#78 pmliquify opened 8 months ago
0
Support NVIDIA L4T 36.2

#77 pmliquify opened 8 months ago
0
1 merge with upstream master

#76 sb3d-tech-mteitel opened 8 months ago
0
Do I need to change dtsi for Camera Triggering

#75 musafzenbilci opened 8 months ago
2
Problem porting from Yocto Dunfell to Kirkstone - Cameras detected but no video devices created.

#74 taldhous-imetrum closed 8 months ago
1
Device tree configuration for Jetson Linux 36.2

#73 andresmanelli opened 8 months ago
1
XavierNX with IMX183 version above 0.12.3

#72 PierrickIntom opened 9 months ago
5
Support NVIDIA L4T 35.4.1

#71 pmliquify opened 9 months ago
0