-
Commit 7b0cc24f950f3c9a2e8d39080e4dffc75a511f40 introduced a regression in USB 2.0 functionality. The CONFIG_GPIO_WRITE() macro does not ensure the bit for small DMA xfers remains set, causing the de…
jynik updated
10 years ago
-
As noted by @n2cr, attempting to attach an XB-100 via `bladerf_expansion_attach()` succeeds, despite there being no FPGA or host-side support for this device yet.
I will push a patch to have this re…
jynik updated
10 years ago
-
A number of important options are undocumented.
jynik updated
10 years ago
-
Assigning to @robertghilduta.
Rob, could you also add the firmware loopback option to the CLI when closing this item?
jynik updated
10 years ago
-
When trying to compile under Windows the 0.15 git version of libbladeRF, cmake fails at finding exported symbols from libusb.
Here are the requirements to reproduce that:
- libusbx-1.0.18
- compile 3…
-
All received I samples have value of 0.
This was introduced in commit 20da74a : "hdl: add missing IQ calibration GPIO read/write in NiOS" on May 06, 2014
Tested using:
Firmware version: 1.7.0-git-0…
-
The version check routines are implemented the opposite of how they're described in bladerf_priv.h.
So far, this has adverse affects on:
- Writing the VCTCXO value from flash to the correct FPGA loc…
jynik updated
10 years ago
-
In the future, the API functions in bladerf.c are planned to simply consist of lock acquisition and making a call to the associated module.
Submodules (e.g., lms.c) should not be calling back up into…
jynik updated
10 years ago
-
A various number of rx samples is missing in the middle of the rx stream. The failure occurrence is irregular. The exact position needs more investigation work, but it seems to appear at the same pos…
-
Currently, commands that required that a device handle be opened or the FPGA be loaded implement their own checks:
```
/* Check that we have a device to operate on */
if (!cli_device_is_opened(state)…
jynik updated
10 years ago