-
A [software solution for this was discussed some years ago in this forum](http://forums.nesdev.com/viewtopic.php?t=5826).
Btw recently [many NES implementations in FPGA](https://github.com/mist-devel…
-
```
According to some documents and FCEUX code, 6502 has some double read/write
behavior (for example, read-modify-write operations actually write twice).
FCEUX implements them, but BizHawk doesn't.…
-
The ProDOS driver for the HD doesn't report back the block size in the X (low) and Y (high) registers on a ProDOS status call. This would need some modification to the HDD firmware 6502 code to allow …
-
The README suggests the C64 used the 6502, but actually, it used the 6510, is this a 6502 emulation or 6510? It suggests you could make a C64 with this emulation, but if it is a 6502 emulator, it may …
-
Hi Roland,
I'm still using your extension every day with great fun and productivity gain.
As I said earlier, I'm approaching the point where I would like to evaluate the feasability of porting to …
-
Dear @onnokort,
Thank you for mentioning my livestream attempts on your README! I am planning to give you some feedback on my testrun of semu-c64 but as the whole livestreaming action has taken so …
-
In addition to the [native C128 port](#53), support for the [Mega 65](https://mega65.org/) and the [Commander X16](https://github.com/commanderx16) would be positively amazing. The former is basically…
-
Emulation isn't perfect, so assist the developer (who's using AppleWin) to spot things that will misbehave on real hardware. Also some of these things may occur very rarely (eg, the SSC false-read to …
tomcw updated
4 years ago
-
I'd hoped that the timer issues were fixed for good, but I found some old ROMs that were used for testing timer functionality. Unfortunately, the output they give on a real system doesn't match Stell…
-
I've wondered about using a Propeller in a SBC that I have created. My computer runs between 1 and 4 MHz (6502). I have pushed it to 8 MHz with no issues.
However, I've wondered how the Propeller…