-
PSL lacks unit tests. I'm interested in writing them, if you think they would be useful to the project.
- [ ] Add unit tests for Peripherals
- [x] Add unit tests for achan
- [ ] Add units tests f…
-
Greetings!
I am trying to rebuild your setup with a ESP32 board and a HC-SR08 (ad9850).
Having a hard time to find out the correct pins and the according micropython settings.
Actually I would…
-
## IMPORTANT
Before submitting this issue
[x] Have you tried using the latest version of the library?
[x] Have you checked this has not already been submitted and/or resolved?
[ ] If you are reque…
-
## IMPORTANT
Before submitting this issue
[X ] Have you tried using the latest version of the library?
[X ] Have you checked this has not already been submitted and/or resolved?
[X ] If you are re…
-
Trying to use the code with NodeMCU (ESP8266) and it doesn't connect to any of my WiFi networks. Without wifi connection I can't check if the rest of the code works. At first ESP reports, that it rece…
-
I try to build a sweep sine generator with this library and can't find a method to reset the ad9833 chip.
The problem is - when I start the sweep, the phase accumulator of ad9833 is not zero and each…
-
I've created a [test repo](https://github.com/simonewebdesign/md-test) for reproducing this bug.
Basically, if I try to add some code in an ordered list by indenting it with 4 spaces, it doesn't get …
-
This library, just like every other library I have found on this chip, has no ability to enable pin control. the AD9834 can be register controlled (Reset, Phase0/1, Freq0/1) as well as Pin controlled.…
-
I am working on a driver for [AD9833 and co.](https://github.com/eldruin/ad983x-rs) waveform generators / DDSs.
This device requires SPI transfers of 16-bit words but the current SPI mock implementat…
-
**Info**
- OS: Win 10
- Arduino IDE version: 1.8.8
- STM32 core version: 1.4.0 and 1.5.0
- Upload method: Mass Storage
**Board**
- Name: Nucleo L152RE
**Additional context**
Here is a…
lorol updated
5 years ago